Shutter speed Write-up

Shutter speed can be used to allow light to enter the camera for a certain period of time. The longer the shutter is open, the more light enters the camera, the shorter the shutter is open for, the less light enters the camera. The shutter speed o most cameras can usually be set somewhere between 1/1000^th of a second, and 30 seconds. The shutter can be used to make various effects. If it is a dark scene, you would use a slower shutter speed to try and get the photo exposed as best as you can. You can also use it to create motion blur. Motion blur is where you take a picture with a slower shutter speed, whilst panning, which creates a blurred background, giving the impression through the photograph, that the subject is moving. You can also speed up the shutter, which allows the subjects movement to be frozen in a position. You would use this when photographing a waterfall, or the sea, where the water is moving, and you wish to freeze it in a position without blur.

Here we can see that the subject is producing motion blur, due to the fact that the shutter isn't fast enough. This picture was taken at 1/30 of a second

Here, the image is has also got motion blur due to the shutter not being fast enough, this was also taken at 1/30 of a second.

As you can see this image is much better. it doesn't have any motion blur, but does a have a small problem with it being out of focus. this can be fixed by using manual focus. this picture was taken at 1/500 of a second.

These two images are also controlled using shutter speed. These two photographs were taken using the continuous shooting mode to get the right image, but were shot at 1/800 of a second.

 

Lighting - Side and Front Lighting

Side and front lighting is where the light falls on a particular part of the subject. Side lighting is where the light comes from the side of the subject. This can connotate darkness in the photo, as light is only falling on one side of the subject. Side lighting is good for photographing males, as it accents the jawline, do to where the light hits the subject.

Front lighting is where the light comes from in front of the subject and hits the front of the subject in the photograph. Depending on where the light comes from it produces different effects. if the light comes from above, it produces what is known as "butterfly lighting" this is because it makes a shape that is very similar to a butterfly under the nose. Front Lighting can also be called Glamor lighting. 

Front lighting is usually used to photograph females, as it produces more feminine features, it also softens the jawline and the check bones.

Here are some side and front lighting pictures that i have taken. In order to take these pictures i took a tripod, and used a friend of mines car headlights in order to create the side and front lighting. 

Side Lighting

As you can see, side lighting accents the jawline, and also emphasises the stubble on the bottom of the chin, and the more manly cheek bones. This image is a little bit under exposed, so i could do with increasing the ISO to allow more light into the camera.

Front Lighting

As you can see, Front lighting smooths out the jaw line a little bit, and also smooths out the chin, and the hair line. this image is slightly out of focus, to improve this i could use the manual focus feature, or decrease the aperture and increase the shutter speed.

Introduction Project

In this project I have successfully used the following techniques, Text Control, Layers, Filters, Load Selection and the Cropping tool. Each of these tools I have used very basically, as I do not know how to use them to their full potential. The work I am blogging, shows progression in these skills, because I have only used them to a very basic level before if at all, for instance in the past I haven’t used the load selection tool, and have only used the filters to play with to see what they do. The weaknesses in my product is that it doesn’t look particularly professional, as I haven’t used all the features I could have used, but instead have only used a limited number to a basic level, to improve this I could continue to learn Photoshop, and then should be able to endorse more tools in my work. If I was to do this project differently, I would try and use the camera to a better standard, and learn how to edit photographs more efficiently before doing the project. To move towards the standard achieved in professional working practice, I will have to study media products more to see what they do to make them look better.

For this Product, prior to rebranding, the Target Audience was older parents, or people on the move who don’t have time to prepare big meals. Now, our target audience is 16-19 year olds in Socioeconomic group ABC1. The elements in which we used to engage our audience are the font, and the pig. Because we didn’t use a real pig, the mask creates more of a humorous aspect to it, and the font is more of a teen font, as opposed to a serious font. To improve my product, I would use the camera more affectively, and use Photoshop to create a better more professional looking poster than this one. This is tailored to the needs of our target audience, because when we created this idea, we did not know everything about our target audience, but next time I will be able to meet their needs better. This demonstrates my understanding of segmentation systems, as I have adapted the product, and brought more humour to the product, so that it will appeal to a younger audience. 

Initial Skills Assessment

 

Example 1:
Original                                 Photoshoped


 
Example 2:
Original                                            Photoshoped


 
Example 3:
Original                                    Photoshoped